Features

Of exclusive use for leaning on walls. Build with parallel uprights of differentiate section depending on the height, from 60 x 25 mm to 75 x 25 mm.

Treads are non-slip with an square-shaped section of 30 x 30 mm and the ladder outer width is of 42 cm.

This ladder supports: 150 Kg

Features

Of exclusive use for leaning on walls. Pulling the rope, the second section lifts or goes down.

The lower section is made on extruded aluminum with antifriction guides and stabilizing base. The rope runs laterally, to avoid to interfere in the worker’s climb.

At the ends of the second section, it have wheels (R) to ease the ladder’s slide on the wall. Its also equipped with a hooking automatic upper device made in galvanized steel. If the worker accidentally release the rope, the ladder is locked.

This ladder supports: 150 Kg

Features

With same characteristics as the 2 sections model, but adding a third section.

The rope allows the slide of the second section over the first one while the third is moved manually.

At the ends of the third section, it have wheels (R) to ease the ladder’s slide on the wall. Its also equipped with a, stabilizing base.

This ladder supports: 150 Kg

Features

This model allows a three ways use: vertical, open and open with an uneven or stepped ground.

The uprights are parallels and have differentiate sections: from 60x25 mm, 84x25 mm, to 97x25 mm. The treads are non-slip of square-shaped section of 30x30 mm.

The stabilizer base is of variable size depending on the height of the ladder. It have non-slip PVC stoppers and PVC caps at the ends.

Its equipped with a non-slip hooking device in galvanized ribbed steel, as well as aluminum anti-opening rods with fast connection to the crossbar.

This ladder supports: 150 Kg

Features

With same characteristics as the ones of the two sections model, adding a third one.

In this last section, according to the official standard, its only allowed to climb when the ladder is leaning against a wall. Its forbidden to climb on it when the ladder is opened as an stepladder.

In this last position, the third section is only usable as a support for hands and in any case can be used with the feet. It’s also equipped with an stabilizing base and anti-opening rods.

The third section have wheels (R) on top starting from the model 350, to allow the slide of the ladder against the wall in case of leaning it.

This ladder supports: 150 Kg